|
Water wise in your garden
You can reduce garden water use in many ways - from simply watering
less often to investing in a new irrigation system or planting scheme.
Keep your sprinkler system is in good condition. Repair any broken
or missing spray heads or emitters.
Go in for a drip or low-volume irrigation system.
Reduce your lawn maintenance - mow higher and less often, don't
rake up the clippings, and avoid over watering.
Water the lawn only when needed. Step on the grass; if it springs
back up when you move your foot, it does not need water.
Accept a less than lush lawn. Grass goes dormant during periods
of drought, but will readily regenerate when water becomes available.
Reduce traffic on stressed turf areas if possible.
Drier areas require more water than areas where water settles.
If necessary, water dry areas by hand.
Use a soil probe to test soil moisture. Water only when a soil
probe shows dry soil or a screwdriver is difficult to push into
the soil.
Match fertilizer to the plant requirement. Fertilizer applications
require additional water. Excess fertilizer stimulates top growth,
often to the detriment of the root system.
* Unused portions of the lawn can be allowed to turn brown. Use
the water for more desirable landscaping.
Replace lawns and plants that have heavy water demands with drought-tolerant
varieties.
Check plants for moisture before watering. Look for clues such
as curling leaves, a grayish color and permanent wilting, which
indicate under watering. (If the leaves turn yellow and drop, you
could be over watering.)
Keep your beds and lawns weeded. Weeds steal moisture from desirable
plants.
Mix soil polymers, which retain moisture, into your soil. Add them
when planting beds or containers, or drill the soil around existing
plants and drop the polymers into the holes.
Mulch to retain moisture in the soil.
Don't water the sidewalk If you use sprinklers to water your lawn
or garden, make sure their settings are such that they don't waste
water on the street, sidewalks or your driveway.
|
